10 Simulating events from a video
supitalp edited this page 2019-09-19 11:18:21 +02:00

In this tutorial, we will show how to use ESIM to simulate events from a given video.

Example conversion from video to events

Left: simulated APS frames (including motion blur) Right: simulated events with ESIM.

WARNING

Simulating events from a video will not work for any video. The input video needs to have a sufficiently high framerate: the pixel displacement between successive images needs to be small (i.e. a few pixels at most). Otherwise, the simulated events will be of poor quality.

Preliminaries (basic knowledge of ROS)

To follow this tutorial, it will be helpful to have some basic understanding of ROS (i.e. know what ROS nodes, messages and topics are). If you do know ROS yet, we recommend to skim through the ROS beginner tutorials, in particular Understanding ROS Nodes and Understanding ROS topics.

Overview

An overview of the conversion method is shown in the diagram below. First, we will extract the individual frames from the input video in a folder. Second, we will run ESIM, providing the image folder as an input to simulate events. Finally, we will see how to visualize the simulated events using the dvs_renderer node.

Overview of the methodology to convert a video to events

(Optional) Download an example video

As an example input video, we will use this nice video from National Geographic, which shows a running cheetah recorded at 1200 frames per second with a Phantom camera.

  • Create a working folder:
mkdir -p /tmp/cheetah_example
cd /tmp/cheetah_example
  • Download the video from YouTube using youtube-dl (pip install youtube-dl):
youtube-dl https://youtu.be/THA_5cqAfCQ -o cheetah
  • Cut the part of the video that is relevant. In our case, we will cut the slow motion part from 2'07 to 2'47'':
ffmpeg -i cheetah.mkv -ss 00:02:07 -t 00:00:40 -async 1 -strict -2 cheetah_cut.mkv
  • Optionally, resize the video to a smaller size for faster processing. Here, we will resize the video to a width of 640:
ffmpeg -i cheetah_cut.mkv -vf scale=640:-1 -crf 0 cheetah_sd.mkv

Pre-process the video for ESIM

  • Export the video to a sequence of individual frames in the frames folder:
mkdir frames
ffmpeg -i cheetah_sd.mkv frames/frames_%010d.png
  • Finally, create an images.csv file in the frames folder, which will be necessary for ESIM. Each line of this file contains the image timestamp and path in the format: timestamp_in_nanoseconds,frames_xxxxx.png:
roscd esim_ros
python scripts/generate_stamps_file.py -i /tmp/cheetah_example/frames -r 1200.0

where -i specifies the path to the folder containing the frames, and -r specifies the input video framerate (1200 fps in our case).

Simulate events with ESIM

rosrun esim_ros esim_node \
 --data_source=2 \
 --path_to_output_bag=/tmp/out.bag \
 --path_to_data_folder=/tmp/cheetah_example/frames \
 --ros_publisher_frame_rate=60 \
 --exposure_time_ms=10.0 \
 --use_log_image=1 \
 --log_eps=0.1 \
 --contrast_threshold_pos=0.15 \
 --contrast_threshold_neg=0.15

If you get an error message: Could not find ROS master, open a new terminal, and start a roscore as follows: roscore.

Explanation of the parameters

  • --data_source=2: tells ESIM to read from a folder containing images. ESIM will look for an images.csv file describing the timestamps of the images to read.
  • --path_to_data_folder: path to the folder where the frames and the images.csv file are located.
  • --path_to_output_bag: the generated data (events and frames) will be saved into a rosbag at this location
  • --ros_publisher_frame_rate: frame rate of the simulated APS (frame) sensor (in frames per second).
  • --exposure_time_ms: exposure time of the simulated APS (frame) sensor (in milliseconds).
  • --use_log_image=1: tells ESIM to operate in the log-intensity domain. This means each input image will be converted to log, as follows: L = ln(I / 255 + eps), where eps is set via the --log_eps parameter.
  • --contrast_threshold_pos and --contrast_threshold_neg: values of the positive (resp. negative) contrast threshold. A lower value means a higher sensitivity (more events). A higher value means a lower sensitivity (less events).

Visualizing the simulated event data

After running ESIM as shown in the previous section, all the simulated data is saved in a rosbag (at /tmp/out.bag in our example). To visualize the events, you can open a new terminal, and start the dvs_renderer node as follows:

rosrun dvs_renderer dvs_renderer events:=/cam0/events

Then, you can play the saved rosbag, in a loop (-l), and slowed down 10x (-r 0.1):

rosbag play /tmp/out.bag -l -r 0.1.

You can now visualize the simulated events by opening rqt_image_view (in another terminal): rqt_image_view /dvs_rendering.

Note: you can also visualize the simulated APS frames (including motion blur) by selecting the tab /cam0/image_corrupted from the list at the top of rqt_image_view.